Interlocking Bricks
Brick interlocking is not the same as conventional bricks, which do not need mortar to build walls. The key and lock mechanisms are designed so that each brick can lock with the others. This article on civil engineering will tell you about the pros of interlocking blocks.
There are many types of interlocking blocks, including interlocking wall bricks and interlocking landscape tiles.
Prices for Interlocking Bricks
The market sells interlocking bricks starting at Rs. 8 per piece. The price of interlocking bricks per unit may vary depending on factors such as the material, size and application, strength, brand, design, and others.
It isn’t easy to design interlocking bricks. This can cause back pain. It can be cheaper to hire a mason or landscaping contractor to do the job for you.
Interlock Bricks Size
The bricks should measure 125 mm by 250 mm by 100 mm, and the diameter of the reinforcement bar (rebar) should be 12 mm.
Interlocking Bricks: Benefits and Advantages
Interlocking bricks can be beneficial in the construction sector.
Earthquake Resistant
Interlocking bricks are a good way to resist earthquakes. The structure is subjected to various stresses due to earthquakes. Conventional bricks could not carry the load as they are unable to transfer the seismic loads across the structure in an equal manner.
If the mortar fails, then the entire structure will collapse. Interlocking bricks can transfer seismic forces equally across the whole system due to their self-locking pattern.
Plasterwork Elimination
Interlocking bricks can also eliminate work on plastering. It saves money and time compared to traditional wall construction. Plastering can be laminated by using smooth-finished bricks.
The wall can be smoothed out with a thin coat of paint. Using these bricks to build walls gives a neat, low-maintenance finish.
Cooler Interior
The walls made of highly compacted bricks are usually warm. The high-compacted walls have a higher density, which makes them resist airflow and create warm interiors.
Interlocking bricks are less dense than traditional bricks, allowing for better airflow. These bricks will make your interior much cooler. There is no need to use air conditioners, which reduces energy consumption and saves you money.
Unskilled and Fewer Labors
Skilled laborers are needed for the construction of walls using conventional bricks. This is because it takes some skill to check for water levels, spirit levels, and other crafts. It is because of this that unskilled workers find it hard to build conventional walls.
Interlocking bricks are a great way for untrained workers to learn how to build. These bricks also require fewer workers for construction. It also reduces labor costs, which is great for entrepreneurs.
Reduces cost and time
It can reduce cement, sand, and stone dust costs by a significant amount since the construction process is not required. It also reduces labor costs and transportation costs.
The construction process is also time-efficient. Interlocking bricks only require seven days to cure as opposed to the 21 days as are necessary for conventional bricks. It saves time and money because it doesn’t need plastering.
Interlocking Bricks: Disadvantages
Interlocking bricks have some advantages but also a few drawbacks.
- There is no plasterwork between the bricks so that insects can hide in these lines.
- The disintegration of bricks caused by adverse weather conditions is another major problem.
- The bricks cannot support the weight of a building higher than two stories.
The conclusion of the article is:
The information above should have helped you understand the pros and cons of interlocking blocks. Please leave your questions in the comments section below.